$ 10.00
This Black Polypropylene (PP) has a melt-flow value of 20 and is fairly easy to inject.
The mold will need slight pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
These are Brown Polypropylene (PP) pellets.
This material is easy to inject and the mold will need some pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
Polypropylene (PP) is used in a variety of applications to include packaging for consumer products,
plastic parts for various industries including the automotive industry.
These pellets are listed as a colorant for Polypropylene. Molded parts have similar properties to Polypropylene.
View full product details →
$ 10.00
Polypropylene (PP) is a common thermoplastic resin typically used for injection molding applications.
It offers a good balance of properties and cost, uncommon to most other thermoplastics.
Polypropylene provides outstanding physical, chemical, mechanical, thermal, and electrical properties not found in any other thermoplastic.
This Polypropylene has a melt-flow value of 20 and is easy to inject.
This is a good all-around general purpose material.
View full product details →
$ 10.00
These are White Polypropylene (PP) pellets.
This material is easy to inject and the mold will need some pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
These are Red Polypropylene (PP) pellets.
This material is easy to inject and the mold will need some pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
These are Green Polypropylene (PP) pellets.
This material is easy to inject and the mold will need some pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
These are Violet Polypropylene (PP) pellets.
This material is easy to inject and the mold will need some pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
These are natural (uncolored) Polypropylene (PP) pellets. The molded items will be translucent (not transparent).
This material is fairly easy to inject and the mold will need some pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
These are Grey Polypropylene (PP) pellets.
This material is easy to inject and the mold will need slight pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
These are Yellow Polypropylene (PP) pellets.
This material is easy to inject and the mold will need some pre-heating for best results. This is a good all-around general purpose material.
$ 10.00
POLYETHYLENE (PE) is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components, and various molded laboratory equipment.
HDPE has excellent tensile strength, energy consumption, abrasion resistance, and resistance to stress cracks, and good chemical resistance and electrical properties.
$ 10.00
POLYETHYLENE (PE) is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components, and various molded laboratory equipment.
HDPE has excellent tensile strength, energy consumption, abrasion resistance, and resistance to stress cracks, and good chemical resistance and electrical properties.
$ 10.00
LDPE is widely used for manufacturing containers, dispensing bottles, wash bottles, tubing, plastic parts for computer components, and various molded laboratory equipment.
It is translucent to opaque, virtually unbreakable, and very flexible.
This Low Density Polypropylene (LDPE) has a melt-flow value of 20 and is easy to inject.
LDPE resins are safe for food contact.
$ 12.00
This material is listed as a colorant for Polyethylene. Molded parts have similar properties to Polyethylene.
These pellets are pale violet (lilac) in color, and after injection the parts have a shiny surface.
$ 10.00
This material is Acrylonitrile Butadiene Styrene (ABS). ABS is a very common thermoplastic. It is tough and rigid and has good chemical resistance and dimensional stability.
This ABS has a high Melt Flow Index (MFI=44) which helps it flow better in our machines. The color is black.
$ 10.00
This material is Acrylonitrile Butadiene Styrene (ABS). ABS is a very common thermoplastic. It is tough and rigid and has good chemical resistance and dimensional stability.
This ABS has a high Melt Flow Index (MFI) which helps it flow better in our machines. The color is natural.
$ 12.00
These Polystyrene (PS) pellets are translucent amber High Impact Polystyrene (HIPS).
HIPS has good dimensional strength, balanced properties of impact strength and heat resistance, is easily machined, and is relatively low cost.
Because of its good impact strength at low temperatures, it is typically used for home appliances, toys, and electrical components.
This Amber Polystyrene is easy to inject and produces very strong parts.
$ 10.00
This material is a thermoplastic elastomer (TPE). TPE's show advantages of both rubbery materials and plastic materials. Molded parts are flexible and have a soft rubbery feel.
This material is very easy to inject and the mold requires little or no pre-heating. It is rated Shore 67A. Perfect material for beginners.
$ 10.00
This TPV shows advantages of both rubber materials and plastic materials. Molded parts are flexible and have a firm rubbery feel.
It is rated Shore 64A.
It can be used for soft touch grips, gaskets, as well as replacing silicon in some applications. This material is easy to inject.
Shore 60A
Thermoplastic Vulcanizate (TPV) is a type of Themoplastic Elastomer (TPE) that is crosslinked to enhance rubber-like properties and processes like a thermoplastic.
This material is very easy to inject and the mold requires little or no pre-heating. It is rated Shore 60A.
Shore 86A
Thermoplastic Vulcanizate (TPV) is a type of Themoplastic Elastomer (TPE) that is crosslinked to enhance rubber-like properties and processes like a thermoplastic.
This material is very easy to inject and the mold requires little or no pre-heating. It is rated Shore 86A.
Shore 74A
This material is a thermoplastic elastomer (TPE). TPE's show advantages of both rubbery materials and plastic materials. Molded parts are flexible and have a soft rubbery feel.
This material is not difficult to inject and the mold requires no pre-heating. It is rated Shore 74A.
$ 10.00
This material is a thermoplastic elastomer (TPE). TPE's show advantages of both rubbery materials and plastic materials. Molded parts are flexible and have a soft rubbery feel.
This material is very easy to inject and the mold requires little or no pre-heating. It is rated Shore 78A. Perfect material for beginners.
$ 12.00
Santoprene™ 201-55 is a TPV that shows advantages of both rubber materials and plastic materials.
Molded parts are flexible and have a firm rubbery feel. It is rated Shore 59A.
Click to see Shore hardness chart: SHORE CHART.
This material is easy to inject. The color is slightly off-white.